MJX Hyper Go H8H V2 Defender All Rock Brushless 1:8th Scale Crawler

MJX H8H V2 ALL ROCK 1:8 scale RC Crawler Climbing truck. Marketed as a climbing truck, the H8H is unique in that it can master both slow speed crawls and high speed pursuits (17mph+) with plenty of power available for on-demand wheelies.

The MJX H8H truck is absolutely packed with features with a IP67 rating for water and dust protection, remotely switchable high/low speed transmission, controllable LED lights and bluetooth/smart phone connectivity.

Driving control is aided by a 35KG steering servo, fully metal drive transmission, front and rear lockable differentials, high/low speed gears and a unique FOC vector control system providing absolute control of the magnetic encoded-sensing brushless motor system. Fully compatible with both 7.4v 2S and 11.1v 3S LiPo batteries with front and rear battery trays.

80A FOC Vector Control Electronic Speed Controller
The MJX H8H electronic speed controller (ESC) features vector control, low torque ripple, low motor noise and fast deceleration and braking. The H8H also supports dual operation modes; both the standard direct forward/reverse (climbing) mode as well as the forward/reverse with braking (normal) mode, meeting the two needs of required of crawler vehicles.

Intelligent torque output and speed closed-loop control
Whether climbing or descending the ESC will automatically increase the output torque to overcome any resistance and help move smoothly over the slope or reduce the torque to stabilise the vehicle speed for seamless descent.

Powerful built-in BEC and Magnetic encoded inductive brushless motor
With it’s powerful built-in BES with a maximum 13A output current and a 6V/7.4V switchable output voltage makes it easy to drive all kinds of standard servos and high-voltage servos, as well as peripheral electrical equipment (lamp sets, winches, etc.).

With Bluetooth app connectivity adjusting parameters on the the fly has become even easier, from adjusting the throttle rate/punch, drag brake, neutral range as well as real time battery monitoring and Motor & ESC temperatures.

The built-in chip magnetic encoding sensor, which helps improves the accuracy by 60 compared to the hall sensor commonly used in ordinary inductive brushless motor. The three-phase signal consistency always outputs pure and accurate rotor position signal.

Also features..
The MJX H8H has an IP67 rating for both Dust and Water protection so you can play until your hearts content. The H8H ALL ROCK also features a professional servo standardly equipped and rated at 35kg steering servo with a metal gear and shell, a mechanical metal gear 2-speed transmission as well as front and rear axle differential lock.

Steel gears, steel transmission shafts and stainless steel connecting rods are fitted throughout the entire vehicle with CNC integrated aluminium-alloy car beams, and alloy oil filled shock absorbers to handle anything you throw at it.

Mounted with 140 LED light beads, allowing the driver to independently control each light group and a front and rear battery compartment so you can put the weight where you need it on the fly with out any tools or additional parts.

 

Specifications:

Models: MJX HYPER GO H8H

Model:1/8

Maximum speed (slow gear)

2S: 8km/h

3S: 18.5km/h

Maximum speed (fast gear)

2S: 13km/h

3S: 29km/h

Power system

1. ESC: Bluetooth APP parameter adjustment – FOC sensor 80A brushless ESC (torque compensation function)

2. Motor: 3970 magnetically encoded FOC sensor brushless motor

3. Servo: 35KG stainless steel gear steering servo

Transmitter

Frequency:2.4 GHZ 8CH

Battery: 2XAA battery(not included)

 

Product structure configuration

1. Front and rear axle differential locks, front and rear door axle structures

2. Aluminum hydraulic shock absorbers

3. Two-speed mechanical transmission

4. Powder metallurgy gears for the entire vehicle (differential, front and rear axles, door axles, transmission gearbox)

5. Steel drive shafts for the entire vehicle, steel connecting rods for the entire vehicle

6. CNC integrated aluminum alloy beam

 

Climbing function configuration

Gate bridge: included

Gear position: 2-speed gear ratio, remote control 17g servo switch

Differential: front/rear differential

Differential lock: front/rear differential lock, remote control 17g servo switch

Reverse transmission: no

Break transmission: no

Two/four-wheel drive switch: no

Winch: optional

Shell fixing method: manual screw + front flip cover magnetic suction

Link mechanism: 4-link + rear Watt link

Servo position: on the bridge

 

Dimensions:

Size: 680×298×325mm

Wheelbase: 373mm

Axle track: 240mm

Wheel diameter:132mm

Car weight: 5.4kg

Package size: 760x390x430mm

Package Weight: 9.7kg

Package Included:

1x MJX HYPER GO H8H (remote control)

1x Instruction manual

1x Hexagonal wrench

1x Screwdriver

EPP Storage Case

 

MJX Hyper Go H8H V2 All Rock Brushless 1:8th Scale Crawler Truck